Jump to content

Taffius

Forum User
  • Posts

    67
  • Joined

  • Last visited

About Taffius

  • Birthday 10/10/1971

Profile Information

  • Gender
    Male
  • Location
    Lincolnshire

Recent Profile Visitors

109 profile views

Taffius's Achievements

Newbie

Newbie (1/14)

1

Reputation

  1. I thought this at one point so i wired switch, then turned wiper on, then tried switch. Same small grunt. I do notice wipers slower on second click so there might be correlation with the switch and washer. Anyone got a wiring diagram for two speed switch and electric washer? Cheers Pete for ideas again, Regards
  2. Dear all, The saga started with the windscreen wiper motor (replaced) then the switch itself. Windscreen wipers work however found windscreen washer did not. Found a Blue and Yellow wire going into the back of the windscreen wiper and when moved, yellow wire came off in my hand (honest). Pushed wire into hole, washers work. However after getting switch finally out of dash I thought a simple rewiring would do the trick - no. The back of switch is sealed. So I purchased a new switch from Rimmers. They only do the manual pump type now so that did not help my electric version issue. I believe the yellow is joined in the loom to the blue so is the source of 12v for the +ve of the washer pump and have traced that yellow wire all the way to the + of actual washer pump. There is a green wire on the pump -ve and found that goes to chassis earth. So I thought this is easy, get a 2 pole switch (non hold) and wire blue to one contact and yellow to other then when switch is depressed, pump operates. No - all I get is a low grunt noise from pump and no washers. Proved there is no blockage and pump works by trying wires straight from battery - works good, got wet. Can anyone help me on a bit of electrical wiring revision? I tried earthing switch itself thinking the body acts as earth to chassis - no, same result. Is the switch not meaty enough to switch the live or am I missing something obvious? Many thanks once again....
  3. Got the switch off and found the issue with windscreen washer - see new post! What fun....
  4. Have some history in a folder however would always like more. I have seen in the folder evidence of the previous owners being members of TSSC. Originally Inca Yellow I believe. Any previous member know it or have TSSC have any info? Cheers
  5. Hi all again, Work to get to MoT ready is progressing: Rear light lenses and bad earths sorted with parts I acquired from a breakers yard (bad earth turned out to be an actual bulb holder). Seat belt - more of an issue. Trying to save money by acquiring a single stem however very difficult. I need a Kangol type I believe but had no answer from Spitfire graveyard. Finally windscreen wiper switch - can only find alternative version which does not come with later electric washer pump connections (Rimmers have not got any original type left apparently). Trying to upload images of the seat belt fittings but having trouble with that too! Anyway thought I would provide an update, etc. Many thanks
  6. Thanks John & Aiden, not seen their website before, handy. Cheers again, should be near MoT time!
  7. Hi, Does anyone know of a Triumph second hand spares specialist where I could get a Windscreen Wiper switch for 1500 with electric washer AND a seat belt holder (the one that the seat belt clips into and is bolted to car - drivers side). Reluctant to purchase all new seat belt assembly and wiper switch new when there might be second hand parts around the country. Thanks
  8. Thanks all very much appreciated. Will have a re-look and go again.
  9. I thought it might be held by a grub screw, however tried screwdriver, allen key, etc to no avail.
  10. Hi all, Anyone with experience in getting the switch front off a Spitfire 1500 windscreen wiper switch? I bought a new one to replace a worn one (plus I need the switch off now as found a broken wire for my washer motor)!
  11. After cleaning all the carbs again and replacing plugs and all leads, I'm up and running again. Now more stuff before MoT!
  12. Cheers Pete and I am grateful for the following and advice. Think I have lost half a litre at least on the floor before picking up manual. Went to get a pump and caught Rimmers closing so am going down plugs and leads first and then will move to pump, pipes, etc. Thanks again.
  13. Ordered on online tonight thanks along with leads and plugs. Many thanks.
×
×
  • Create New...