Hi folks, I am in the process of restoring a Mk 3 GT6. Currently, I am refitting the doors. I fitted the bare door to check the gaps etc. All was well. I then fitted the door seal to check the door still closed ok. Again all was well. When I fit the door card, the door will not shut without forcing it. See marked carpet photo. The card appears to be too big for the aperture. I have made a template that fits the door and has sufficient clearance inside the door seal to allow the door to fit against the seal? This card is quite a bit smaller that the original, see Doorcard photo.
Has anyone else had this problem and how do you get round it.
Thanks in anticipation,
John
