Jump to content

Paul H

TSSC Member
 View Profile  See their activity

  • Posts

    3,076

  • Joined

  • Last visited

  • Days Won

    27

 Content Type 

Everything posted by Paul H

  1. Paul H
    I’ve got a spare which came from a mk2 pm if interested Paul
  2. Paul H
    UPDATE Speedo cable out and it’s seized so replacing with GSD115 which is about 4cms longer so should be no issues with refit . Does the new cable need oiling ? I do have graphite powder The right angle drive . Can’t find this in the manual . Does this need any maintenance whilst I got access . What’s the small screw for please . Paul
  3. Paul H
    Gearbox cover off and Speedo cable undone . It won’t twist at all so will remove and investigate . Paul
  4. Paul H
    Where in Suffolk do you live . I live in Pakenham just outside of Bury St Edmunds Paul
  5. Paul H
    I bought mine from Canleys , a trusted supplier and please change both sides Paul
  6. Paul H
    Checked the Speedo with a spare cable and drill and it’s ok Paul
  7. Paul H
    Thanks , long nose pliers worked and Speedo out . The inner cable is not chewed so guess the issue is at the gearbox end . How I love removing the gearbox cover ! Paul
  8. Paul H
    Speedo in my Vitesse has stopped working . It has been wavering for some time though . I’ve loosened the speedo , removed the wires . I cant undo the speedo so assuming I need to remove the gearbox cover, undo the connector ( I have overdrive) to give enough slack to get access to the back of the speedo Paul
  9. Paul H

    Suppliers

    Paul H replied to iana's topic in General

    My first go to is Canleys Paul
  10. Paul H

    Suppliers

    Paul H replied to iana's topic in General

    I’ve used MeV a few times and can recommend Paul
  11. Paul H
    Not if it’s under the dash Paul
  12. Paul H
    Not necessary now can use the existing male usb will reach the the female usb from the volt reducer Paul
  13. Paul H
    Found a more suitable one https://www.ebay.co.uk/itm/335234145289? Paul
  14. Paul H
    I have a cigarette socket which is used for sat nav Paul
  15. Paul H
    No just a front camera . The cable is hidden by peeling back the windscreen rubber and tucking in . The only visible cable is by the dash and could hide that as well Paul
  16. Paul H
    I was thinking of something like this https://www.ebay.co.uk/itm/195312599599? Paul
  17. Paul H
    The usb plugged into the camera is too short so the cable shown is an extension. USB cable Paul
  18. Paul H
    Oops , thanks for saving my dash cam, back to the drawing board . What do I need to step down the current ? Paul
  19. Paul H
    Thanks for info . I was going to connect red and black cables to 12volts . Is this correct ? Paul
  20. Paul H
    Hi looking to hardwire a dash cam in my Vitesse . There are 4 wires, do I just use the red and black ? Paul
  21. Paul H
    I’ve done the Nissan conversion and with a new Heater Matrix the heat output is good Paul
  22. Paul H
    Yes it looks like you have an Accuspark electronic ignition , same as I’ve fitted to my Vitesse , though I do carry a spare set of points should it fail . You also have Accuspark marked on your plug leads Paul
  23. Paul H
    Here’s a link which I’ve done using a Washing machine pressure switch . ive also just purchased a spare Vitesse dashboard which has a modified wiper switch which now has a pump operated switch Paul
  24. Paul H
    Toolstation sells aerosol paints Paul
  25. Paul H
    Have you tried Carb Cleaner sprayed directly into carbs Paul
×
×
  • Create New...