Paul H

Yes that was me. As Uncle Pete says if it was good enough in the day why change . So Fram filters are the ones I use and change every 2 years Paul

I used https://www.screwfix.com/p/felt-support-tray-5-pack/36622 it was left over from a roof repair. Did an excellent job, even the folds in the trays are in the right place !! Paul

In the end purchased Fram PH966B for my Vitesse from https://www.arnoldclarkautoparts.com/products/fram-oil-filter-ph966b?_pos=1&_sid=55a69e467&_ss=r purchased 3 for £19.75 delivered Paul

Sorry should have said spin off . Paul

Any recommendations, normally buy a few so some time since I bought some Paul

What’s the spec of this clutch ? Paul

I’ve got cdse’s on my Vitesse which I believe are the spec for the mk3 gt6 . There was a few issues with setting up with fuel gasket leaks , rubber slithers , new float valves , bent jet , incorrect jet height . All these issues are fixed and the cdse’s have been behaving for the last 4 years now Paul

I used a piece of black plastic sheet split in 2 with a U section in each to cover the drain plug . Slide the 2 sections together locking the drain plug and silicone in . Easy to remove if required Paul

Can’t agree with the Club Shop sealing kit . Very much overpriced and there are better solutions . Paul

I used SilentCoat, very easy to use . Heat up first with a heat gun . For the contours use a 2ins roller used for sealing wallpaper joins. https://www.deadening.co.uk/products/silent-coat-2mm-deadening-mat?

100 mile range and £20k - not for me Paul

Assuming you don’t have a WSM you can download one free from this link . VitesseSteve site is a valuable source of info for our Triumphs http://vitessesteve.co.uk/ Paul

The club shop ones are dull and look like the originals Paul

I found using a ply board was useful when pulling the gearbox from my Vitesse . The board acted as a “skid” making it easier to manoeuvre in and back in and also protects the carpet Paul

My understanding is that welded seams were used by all manufacturers, which are no longer available unless you can buy NOS which is very rare . All replacements have stitched seams Paul

8 metres for both doors co baines DX 73 Paul

Probably volume plus a lots of hours to produce Paul

As far as I’m aware the only silicone colour the club shop has is black Paul

Looking to re spray my quarter lights and remove prior to spraying and replace the rivets holding the quarter light catch Canleys and usual suppliers don’t list them . Anybody know the spec? Paul

The EBay sunroof sold for £920 . If the top vinyl was black instead of brown I believe the price would have topped £1,000 Paul

Open video click on 3 vertical dots top right . Copy link and paste in your post Paul

You can still buy the vinyl about £40 using your old one as a template . I Paul

This one cost me £4.20 from Anazon IMG_1384.mov Paul

There's a new one on Ebay NOS , https://www.ebay.co.uk/itm/276129977476 starting price £150 though should go for serious money . You can replace the vinyl sunroof yourself for about £150 and a lot depends on the condition of the metal headers as they tend to rust. Adding a headlining is about £30 for the material. To get somebody to do it professionally is close to £1,000 nowadays. I did my Vitesse together with a new headlining . If you want to DIY i can let you have some suppliers and Uncle Pete may still have some NOS headlining for sale Paul