Jump to content

David Mather

TSSC Member
  • Posts

    3
  • Joined

  • Last visited

Everything posted by David Mather

  1. Thanks Clive, now working but not too sure what resolved it. The replacement unit was definitely for the indicators (behind dash panel). I pulled a lot of the connectors off and cleaned all the earths again and again with the hazard switch. Pulled all the bulbs but noticed the rear nearside wouldn't flash when pushed back in the light cluster but was ok before when hazards on. Cleaned up this area also. Hoping a combination of all these things. Thanks again. David.
  2. Hi, noticed my indicators on my Mk3 GT6 have stopped working but the hazards are ok. Tried a new flasher unit, no joy. Wiggled the hazard switch as I know there should be feed from this but still nothing. Electrics really not my strong point. Any help appreciated.
  3. Thanks for this post.... exactly the same with mine (GT6) after fitting new calipers. The inner disc pad on both sides was loose in the caliper. Followed your same steps and problem solved in less than an hour. Was going to start the re-bleeding all over again unless a little forum research. No apologies required for the length of your post. Perfect info. For me at least. Cheers. David.
×
×
  • Create New...