AidanT

Hi - Information from Andy Cook on this subject (Thank you Andy) and others for anyone thinking of doing the same thing Required equipment to fit Nuts - 7/16" UNF thread with a 5/8" sleeve, and a 0.5" sleeve length (5/8" will possibly fit) X 16 in Steel please not alloy Studs 7/16" UNF 43mm in length Spacers for a PCD of 95.25 mm, 2 @ 5mm+ depth and two @ 10mm depth Grateful if someone with first hand experience could confirm the above Regards Aidan

Hi All, I’m looking for some help in regard to the above subject. I have already discussed this with Pete Lewis, and thanks for the information Pete, but I am trying to find someone who has actually fitted these I have looked at various sites in regard to the spaces required in order to get these wheels to fit. Obviously the smalller the spacer, the better it is for the wheel bearings! I have found various suggestions ranging from 6mm to 25 mm. The Wheel inset difference is 25mm (1 inch) but this is also the wheel depth size difference (4.5J to 5.5J) so now I am a little confused to be honest Any advice from anyone whos fitted these wheels would be gratefully appreciated Regards Aidan