brian burton
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Store
Events
Posts posted by brian burton
-
-
Thanks Colin, I will try that now.
-
Thanks Colin, I tried the flash trick unfortunately no success. the first thing I did was look for fuses, only found one red 10 attached to bulkhead, no idea what it's for but it is intact.
-
Hi all, in my eagerness to replace my battery I managed to cross the poles, earth to positive and start the car. Dumb trick I know, anyway I now have no Brake lights or main / Dip beam or side lights, all other electrics seem to be ok.
anyone know what damage I have done & how to put it right ? Hope it's not a complicated job, as even replacing a battery seems to be beyond me !
-
How appropriate is that, Pete mentioned a reliant robin, my first car & driven on a full bike licence. Then the excellent video clip, with the bikes. Well wheel off over the weekend, now what did i do with that big hammer ??
Cheers Brian.
-
Thanks John & Pete, car up & running again
Now showing my total ignorance of all things Triumph, only the nearside wheel moving is this the norm ?
Cheers Brian.
-
Thanks John, for the rapid response. I will give it a go.
Cheers Brian.
-
Hi Folks,
Fired up 13/60 convertible after a 3 month lay up but cannot select any gears. Have pumped pedal & checked master cylinder, which is full & seems to be operating & no obvious leaks. Strange thing is when the engine is not running all gears can be selected. I have the use of a ramp next week end, so is there anything under the car I should be checking / ordering ?
Thanks Brian.
Lights not working
in Electrical System
Posted
Success, started at steering column , found poor connections . Thanks everyone especially Colin. Happy motoring.