LMC

Hi there, Very long time since I have posted anything on here. I need to remove the diff from the GT6 as it is leaking like a sieve and probably needs a rebuild, well it failed the MOT last year to binding brakes and its not the brakes. So, if I put the car up on ramps, can I just unbolt the prop and drive shafts then the six bolts holding the diff to the spring and drop the diff out? (I am sure there are another couple of bolts holding it to the chassis) Its the ramps bit which is important as I want to avoid axle stands and the spring lifter. And on another note, is Mike Papworth still the best person to get diffs rebuilt by or is there someone in the South East on England who can do a decent job? All the best Laurie

It's a rotoflex, and luckily I got a spring lifter for Christmas a couple of years ago.

oooops, placed this in the wrong section of the forum.....sigh

Hi there Been a while since I've posted anything in here, so the GT failed its MOT months ago and I need to remove the diff to get it looked at, probably by Mike Papworth, unless theres any one in the Berkshire area who could be recommended. Anyhow before that can take place I need to acuatally get the diff out. The car is up on stands, but before I start pulling this off the car I wanted to see if anyone had any tips of tricks to removing the diff and are there any jobs that need to be done whilst it is out? Cheers Laurie