Jump to content

BRIAN Hunter

Forum User
  • Posts

    8
  • Joined

  • Last visited

Everything posted by BRIAN Hunter

  1. Problem was inside distributor it seems condenser wire and earth wire bad connection. Like some help on how to fit back accelerator cable to Carburettor do you have a photo or diagram Thanks Brian
  2. Good news car started ran up to temperature acceleration okay needs fine tuning. Not easy to restart even when warm (any suggestions welcomed)? Thanks BRIAN
  3. I have a 1968 13/60 herald with a Stromberg carb. Can anyone send me a photo of hoe the accelerator cable connects to this arbitrator Thanks BRIAN
  4. BRIAN Hunter

    Brian

    Has anyone experienced petrol coming through to carb as a golden yellow?
  5. Good news car started ran up to temperature acceleration okay needs fine tuning. Not easy to restart even when warm (any suggestions welcomed)? Thanks BRIAN
  6. Hi Doug this is a 13/60 has a Stromberg 150 CD The gaskets are all new so should be okay. Yes the distributor had been moved but I hope I have timed it back correctly
  7. The engine has been out and a full de coke . ihave replaced with new plugs, points , condenser,rotar arm , distributor cap . The carburetor has been reconditioned with a specialist . The car will start but only run for a few seconds, this is with the choke fully out as if stating from cold. Hope this helps!
  8. Following rebuild engine will start but not run . Carburetor recon, new plugs ,points distributor cap and rotar arm. Any suggestions?
×
×
  • Create New...