Jump to content

Dean Speer

Members
  • Posts

    4
  • Joined

  • Last visited

Dean Speer's Achievements

Newbie

Newbie (1/13)

0

Reputation

  1. Herlad duly corrected. Now to skin a few more knuckles swapping it around to get this one back on the road.
  2. Hi pete im pretty sure it was the standard one. Martin in the shop has send me another so going to change it around to be sure. He said they will put a sticker on the boxes in future thanks for for your help
  3. Hi Pete thanks I thought that might be the case! B*****r! I have taken out the grease nipple and fitted the blanking plug they supplied. Perhaps they could add a lable to say fit it that was around; the good old Haynes bible has no clues in it. Many thanks
  4. Can any one assist. Changing UJ on Herald drive shaft. Fitted the new one from the Club shop; plenty of swearing and the normal fun!. When mounted on the car with the suspension hanging the hub wont rotate fully. The "flange" on the spier that accepts the grease nibble seems to foul on the yoke. Is there a right or wrong way around? Mine is on the Diff side. With the suspension back under load the car rolls fine but worried it might foul if passing over a larger hump in the road!
×
×
  • Create New...