Woody2000
-
Posts
153 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Store
Events
Everything posted by Woody2000
-
Thanks Peter will do
-
I will do that as well Tony and thanks
-
I suppose it’s like the ones on eBay ??a cable oiler tool rather than taking it out ??
-
no Tony it’s a bit stiff ands doesn’t always work
-
Just checked it’s the inner that needs changing do you know which one or length ?? And thanks again for the help everyone
-
Found this but not sure if it’s the right length can probably glue the other knob on maybe ??
-
Thank you guys for all your help
-
Thank you guys for all your help
-
Chris Whittor says no stock at the moment 😮
-
Hi I need to change my choke cable on a 1973 mk2 some of the ones listed look like a mini one not like the one that’s in there any ideas where to get the proper one from ??? Thanks Mark
-
Hi any one know best place to get a repair arch for my car Mk2 1972 just need the outer arch ?? I located in Surrey Maybe a old rotten one just need the arch ?? Thanks Mark
-
Hi I need to replace the four very old tyres on my Truimph 2000 1972 They are 185/13 (think they are 80 )what is a good tyre size to try ??? Maybe 185/70x13 ??? Thanks Mark
-
Thanks for all your help I managed the other springs it was the handbrake one I was really having trouble with and my Haynes manual had the same photos But Pete has told me where it’s goes so will have another go then just the other side to do 😂
-
Can’t see one listed in club-shop what colour is the cover of yours ?? seen some on eBay but think they are only mk1
-
Can’t see one listed in club-shop what colour is the cover of yours ?? seen some on eBay but think they are only mk1
-
Pete do they do a workshop manual for the Mark 2 2000 or will a Mark 1 do ?? Thanks for the info
-
Hi now have the shoes and springs fitted but not sure about the handbrake springs have fitted it but not sure if it’s right ?!?
-
Hi after all the help with getting my adjusters on the right way round on the shoes I’m having problems with which side the shoe with the adjuster goes working on rear drivers side so think this looks right but Haynes book is confusing me think I have it right in top picture ??? One more question can’t quite work out where the handbrake spring goes think I have it the right way round but cant work it out on bottom picture didn’t take picture of that one 😡
-
That’s probably why I had soooo much trouble getting the drum off in the first place !!! I had to prise it off then put a screwdriver into the brake material and lever the drum off slowly 🥵😡
-
Hi has anyone got any pictures of the set up for the self adjusting spring and plates i have copied them from the previous shoes fitted before but doesn’t look right 🥺 2nd picture is what they were like when I took them off and 1st picture is how I think they should be ideas ??? Thanks
-
Hi looking for a set of wheel nuts for factory 2.5 alloys to fit Truimph 2000 thanks Mark
-
Yes they are the 2.5 alloy wheels so will look at stag wheel nuts and thanks for all answers
-
Hi just got some 2.5 alloy wheels and at the moment I have steel wheels on my car different nuts !! I wondered if any one knew what wheel nuts I need for these alloys and best place to get them
-
Can’t remove track rod ends
Woody2000 replied to Woody2000's topic in Chassis, Suspension & Steering
Good news thanks to a new pair of stilsons and another pair and plenty of force and grunting I have now managed to free the nuts and Renew the track rod ends now I can carry on putting all theothwt bits back on now !!! Thank you for all your help and advice to a newbie at this 👍🏻 -
Can’t remove track rod ends
Woody2000 replied to Woody2000's topic in Chassis, Suspension & Steering
Ok will try and thanks for all the advice
