Hi, I want to replace the washers on my mk3 GT's non-return valve and the relief valve, can I safely unscrew these in situ without anything not going back?, The oil has been drained, and should they be brass washers?. Thanks, Garry.
Hi all, merry belated xmas.
I am replacing my timing cover gasket and when I removed the bolt immediately under the bolt stud around a litre water came out!, it was quite dirty and grey unlike the water I drained for the radiator removal, there was no oil in the water and no water in the oil, is this normal?
Hiya, I bought replacement bulb holders for my rear lights from Rimmers and they do not come with earth terminals, but my indicators and brakes have earth terminals connected to the loom although the reversing lamps do not. The metal lamp unit is earthed to the body. Any help please?
Hiya, my fuel cap has a vent hole with an attachment for a tube, the car did not have a tube fitted when I got the car and fuel could be smelt in the cabin. Do I need to run a tube through the boot floor and if so do I need to fit a one way valve?.
Hi Clive, I should be able to get enough of the look through to do it, but I might take your advise and put a modern one in or while I'm about it extend the wires and put it inside the car as a lot of rally cars had this, thanks for the advise, decision time!
Hiya, does anyone know where I can get a fuel pump filter from part no. 516539?, I've got an inline filter just before the pump so do I need one in the pump?
Thanks Gazza