Search the Community
Showing results for tags 'hazard'.
I have seen a few threads on the hazard and indicators and I have now joined the tearing my hair out club. I have changed the previous steering column from a Dolomite (as fitted by the PO) to a GT6, which has required some wiring changes – however I am stumped with the hazards / indicators. I have got to the point where the indicators will work! - however, when the hazards are on only the left indicators work. It is like the GW wire (as shown on the diagram) is missing – I have tried "jumping" the GW wire to the hazard flasher with mixed success. The hazards work but both right and left indicators work when indicating right or left or the indicators do work but the hazard light flashes at the same time. Any ideas would be much appreciated.
I have fitted an aftermarket hazard light switch to my Herald which wires to the indicator feeds, 12v and 0v and interrupts the feed to the normal indicator flasher unit when pulled. When I pull it on the horn sounds! I'm nowhere near the purple earthing wires in the steering column or the permanent feed wires to the horns. WoThFk is going on? Can anyone explain what might be happening?