Josef Posted May 21, 2022 Report Share Posted May 21, 2022 So, roughly how far down the a-post do the glue-on P section seals normally run? I’m aware that originally they protruded by about an inch above the top of the screen. But can’t figure out if I should be trimming what I have, or just glueing it on as far down the a-post as it’ll go (roughly to the door check strap). Looks like it will fit without interfering with anything, just looks a bit daft! Link to comment Share on other sites More sharing options...
Colin Lindsay Posted May 21, 2022 Report Share Posted May 21, 2022 It only really needs to seal the quarterlight / door glass so a bit lower than that is fine. Mine would run to the 'point' of that red door trim, just above the level of that spire clip. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now