Jump to content

Dolomite Sprint Alloy Wheel Nuts


AidanT
 Share

Recommended Posts

Hi,

 

ANyone know where to buy 7/16" Steel wheel nuts with a 13mm Sleeve for the above?

 

Rimmers is very expensive and I have tried quite a few other suppliers but with no luck - They all have a 5/8" sleeve and would have to double up on washers which I don't think is a great idea!

 

Thx

Link to comment
Share on other sites

You may be better off converting to the later studs and getting the matching nuts.

 

Or convert to M12 studs and look for some metric sleev nuts.

 

LandRover Freelander are the studs you need if going M12. Have the correct spline size to match the original Triumph studs.

 

Cheers

 

Colin

Link to comment
Share on other sites

After a long search, it would seem that these nuts are too specialist to get anywhere but a triumph specialist. I have purchased from Rimmers in the end as they seem to be the cheapest. I have gone for the Steel alternatives as advised

Link to comment
Share on other sites

Hi Pete

 

From other comments and my own thought I think the 45 mm studs should be right although again I am having difficulty finding tapered or domed headed ones

 

My calculations are to add the 10 mm length to cover the spacer depth and although the alloy is obviously thicker than the standard wheel, the nuts have a half inch sleeve which will compensate for that 

 

Aidan

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...