daverclasper Posted January 24, 2016 Report Share Posted January 24, 2016 Hi everyone Vitesse Mk1 2Litre My prop shaft and Half shaft UJ's currently have different types of blanking plug fitted (allen key head and flat blade screwdriver head types). I understand they could be metric or imperial. Does anyone know any of the possible different thread sizes/types so I can order one of each (I'm not experienced enough to determine different thread types) and who may supply them. Also is the longer grease nipple type easier to fit and grease in UJ's. Any advice much appreciated. Cheers, Dave Link to comment Share on other sites More sharing options...
Pete Lewis Posted January 24, 2016 Report Share Posted January 24, 2016 All the long ones ive ever needed are 1/4unf never found a metric one anythings possible dont leave them in or theres serious fouling . pete Link to comment Share on other sites More sharing options...
daverclasper Posted January 25, 2016 Author Report Share Posted January 25, 2016 Cheers Pete Do the long ones need a deep reach socket to fit, or is there enough access for a spanner, do you know please. Cheers, dave Link to comment Share on other sites More sharing options...
68vitesse Posted January 26, 2016 Report Share Posted January 26, 2016 The ones I have, have the nut portion at the top near the connector then plain down to the thread. Regards Paul Link to comment Share on other sites More sharing options...
Pete Lewis Posted January 26, 2016 Report Share Posted January 26, 2016 echo pauls note Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now