Herald front end vents, clips and filters in photo

[jdaley]

In this photo ARE parts I cannot find or understand.

- Filter in the centre of the stip in front of the windscreen base

-Is that a vent above the bonnet clip on the side of the footwell?

- What does the cone fit against in the bonnet, I cannot see anything?

[jdaley]

Photo did not come across 2nd try!

 

Edited June 20 by jdaley
photo would not load

[Pete Lewis]

sorry cant open the file or its timed out  

why not just add photo to a file and click the "choose" file link to upload them 

[Colin Lindsay]

6 hours ago, jdaley said:

In this photo ARE parts I cannot find or understand.

- Filter in the centre of the stip in front of the windscreen base

-Is that a vent above the bonnet clip on the side of the footwell?

- What does the cone fit against in the bonnet, I cannot see anything?

The vent under the windscreen originally had nothing in it at all, so yours may just be an empty slot. Later cars had a screw-in panel, and after that they had a factory-welded grille. If you want one, just find a suitable piece of grillework, cut to size and screw in.

 

As for the bonnet, if you have an early car the cone is on the bonnet and points downwards; later cars were reversed with the cone on the bulkhead pointing up.

 

 

[jdaley]

Seems to be called , "scuttle vent"