Botcanu Posted July 23 Report Share Posted July 23 Had an issue after rebuilding my Stromberg on my 13/60 , to cut a longer story short wouldn’t idle and would cut out at junction’s. A restart would involve pushing the plunger/needle back down via the dashpot. After browsing on here Pete Lewis suggested to another user that the brass tube on the float bowl needs loosening half a turn , tapping ,then retighten to centre/seat the jet . Cured my issue instantly. Many thanks Pete ! Link to comment Share on other sites More sharing options...
Pete Lewis Posted July 23 Report Share Posted July 23 pleased you are sorted, if only i had a clue about some of the stuff i write Ha ! cheap fixes and stick to basics always works drive get the smile and use the wallet for a beer or two Pete Link to comment Share on other sites More sharing options...
Botcanu Posted July 23 Author Report Share Posted July 23 It was the only thing perplexing me . Cured the flooding etc . Won’t forget that tip in a hurry, many thanks again . And not forgetting that joining the club has paid for itself now 😄 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now