GT6 MK3 brake pipe chassis fixing clips

[jimmyrjm]

Hi all,

 

After having a look at my brake pipes the other day I noticed that they should have some kind of fixing on them to the chassis as they would shear off otherwise due to vibration from the engine. As it stands it would fail its MOT. I would love to know what kind of fixing they require? where they attach to and where to get the fixing? I would really appreciate it if anyone could help me out with this. I have attached a photo below. 

 

Also if anyone knows where to get one of these pipe fixing clamps which attaches to the bulkhead (2nd picture) I would really appreciate it also. 

 

Cheers,

 

Jim.

[dougbgt6]

Jim, you asked this before.

 

http://www.canleycla...n-no-ke/kf20001

 

The parts you want are the screw YA0403 and the clip 59308.

[jimmyrjm]

Jim, you asked this before.

 

http://www.canleycla...n-no-ke/kf20001

 

The parts you want are the screw YA0403 and the clip 59308.[/quote

 

Hi Doug,

 

Ah yes on the coil question! Haha with all the engine work I must've forgotten!

 

Thanks for sending the information again!

 

Regards,

 

Jim.

[jimmyrjm]

However still after the fixings for the brake pipe at the front of the car by the engine?

 

Jim.

[Colin Lindsay]

If that's the one on the top edge of the bulkhead, a simple plastic P clip and screw does the job.

[dougbgt6]

 Jim, time for a lie down in a darkened room!   I don't think there ARE clips for the other pipes, they are held ridged on the chassis by their joints at either end.  

[jimmyrjm]

Jim, time for a lie down in a darkened room!   I don't think there ARE clips for the other pipes, they are held ridged on the chassis by their joints at either end.

 

Oh okay well that's that then haha I will Doug

 

Jim.

[jimmyrjm]

Found this clip attached to one of my old front brakes that I replaced, must be a mounting clip to the chassis.

 

Jim.