fungus Posted August 28, 2016 Report Share Posted August 28, 2016 Hi Folk's been going through some bits in the garage. my 36 year rebuild on my herald coupe is still going. front end done so I thought I'd fit the badge bar I bought many moons ago at beauliegh auto jumble. if i remember it was sold as suitable for a herald or vitesse. Didn't cross my mind to try it at the time but now I can see it will not fit. It is supposed to fit on the top bolts of the overidgers ( I think). any one got any idea what it would fit. I'm thinking a spitfire or GT6. According to the pack the par number is 577164 which does not match ether the 948/1200 (559931) or 13/60 (570107) and can't find anything on tinternet. measurement are mounting bracket centers 65cm. 5cm center from bottom of bar and the front is angled out 5cm Link to comment Share on other sites More sharing options...
Colin Lindsay Posted August 29, 2016 Report Share Posted August 29, 2016 It's entirely possible - given the curve at the middle - that it's for an early GT6; this would reflect the angle of the grille. My early nudge / bumper bars also have this curve. I'll measure the distance between the front overriders on mine and see how close it is. 1 Link to comment Share on other sites More sharing options...
Herald948 Posted August 29, 2016 Report Share Posted August 29, 2016 Here's a picture of what looks to be the same or a very similar bar mounted on the front of a GT6 Mk3: 1 Link to comment Share on other sites More sharing options...
fungus Posted August 29, 2016 Author Report Share Posted August 29, 2016 Here's a picture of what looks to be the same or a very similar bar mounted on the front of a GT6 Mk3: that looks like it 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now