Mike T Posted September 26, 2016 Report Share Posted September 26, 2016 Hi I have just fitted a Rimmer sports exhaust to my GT6. It has the centre silencer and the twin rear silencers. The old system I took of was a twin rear silencer system but the only mountings were on the two rear silencers which hung off the rear valance. I am not happy having all the weight just supported from the back. I bought a mounting kit as well but it is not clear what I should be mounting off and to which part of the exhaust. In the kit were the two brackets in the photo below plus a lot of "U" clamps. Any suggestions? Mike Link to comment Share on other sites More sharing options...
Pete Lewis Posted September 27, 2016 Report Share Posted September 27, 2016 well here a bit of a guess the angled with bush fits the diff front carrier and the twisted one comes of the clutch hsg / gearbox zone Link to comment Share on other sites More sharing options...
John Bonnett Posted September 27, 2016 Report Share Posted September 27, 2016 Correct Pete. It is important that the rear mounts comress the rubber bobbins not hang off them. This not only will give a much better life of the bobbins but also will allow a bit more ground clearance. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now