AidanT Posted February 8, 2017 Report Share Posted February 8, 2017 Hi all Does someone have a picture of his Pannel fitted to the car? I will be fitting a second hand one in my car when I have cleaned it up but I'm not sure of the angle it fits and cannot find any pictures on the web. I have seen the parts diagram on canleys and will have to fabricate the foot rest bracket so if someone could tell me what the angle of the bracket is that would also be really useful Thanks Aidan Link to comment Share on other sites More sharing options...
Colin Lindsay Posted February 9, 2017 Report Share Posted February 9, 2017 Give me an hour or two and I'll oblige with a photo. Link to comment Share on other sites More sharing options...
AidanT Posted February 9, 2017 Author Report Share Posted February 9, 2017 Thanks Colin, If you can give me an idea of the angle it sits at - that would be brilliant Guestimate is fine Aidan Link to comment Share on other sites More sharing options...
dougbgt6 Posted February 9, 2017 Report Share Posted February 9, 2017 Is this the passenger side foot rest or, the small driver's side foot rest? Driver's side bolts to the cardboard gearbox cowl, mine has puled off and needs redesigning to bolt to the floor. Link to comment Share on other sites More sharing options...
AidanT Posted February 9, 2017 Author Report Share Posted February 9, 2017 Hi Its the passenger one, but if anyone has a picture or design for the the drivers side one please let me know - I don't have that one either !! Aidan Link to comment Share on other sites More sharing options...
Colin Lindsay Posted February 9, 2017 Report Share Posted February 9, 2017 I hope you can make this out ok - the panel is angled at each end so that the bottom sits against the floor stiffener panel and the top edge is then parallel to the bulkhead panel. I have an unfitted panel somewhere in the other garage and can post photos of that before the weekend if you need them. Link to comment Share on other sites More sharing options...
AidanT Posted February 9, 2017 Author Report Share Posted February 9, 2017 Thanks Colin I think I can work it out from there ! Is the bracket behind not really necessary then? Aidan Link to comment Share on other sites More sharing options...
Colin Lindsay Posted February 10, 2017 Report Share Posted February 10, 2017 I've not removed mine but unless it's a stiffener or strengthener I don't see any reason for it. The driver's side rest is the smaller one that bolts to the gearbox tunnel cover; held on by two bolts or setscrews. I've never used one; I replaced the tunnel cover years ago and never replaced it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now