Pete Lewis Posted November 15, 2017 Report Share Posted November 15, 2017 If a repair is possible consider cutting the drain spout off it just not needed and makes tank refiiting a doddle Pete 1 Link to comment Share on other sites More sharing options...
sami 13/60 Posted December 3, 2017 Report Share Posted December 3, 2017 Hi Folks, Quick update, (been offline with computer issues, but sorted now).......had a chat with my neighbour and he thinks it will be possible to do a repair. I've now emptied and flushed the tank through with water and it's in the garage awaiting his attention when he has time (probably another week or two). He reckons on cutting a large piece out (including the drain point) using an air saw, and then standing a safe distance and lighting any remaining fumes through the enlarged hole (with the fuel cap off too) and this shouldn't do any damage with that amount of venting. Then it should be a simple case of welding in a new patch, which should be fairly easy for someone with his skills I think. If this fails then it's back to the search fro a tank at a reasonable price and distance. Samantha. Link to comment Share on other sites More sharing options...
JohnD Posted December 3, 2017 Report Share Posted December 3, 2017 He's brave. Soaking a tank in hot water with detergent, renewing the water twice daily for a week, removed all smell of petrol and persuaded my local welder to repair a relatively new alloy tank for me. Might not work on an old tank Others fill the tank with water, leaving a rim to weld to, or flush the tank with a continuous flow of compressed air, to keep down the level of fumes. Rednecks connect the tank to their car's exhaust pipe (yes, really!) John Link to comment Share on other sites More sharing options...
Pete Lewis Posted December 3, 2017 Report Share Posted December 3, 2017 bearing in mind petrol fumes can hang around and be quite volatile it cant be much worse than the old trick of a tin fill with gas an light it, ker bangpop , mind you as kids we filled a 5 gallon drum with gas ...it took about a month for the eyebrows to grow back we all learn as we grow Ha ! Pete Link to comment Share on other sites More sharing options...
JohnD Posted December 3, 2017 Report Share Posted December 3, 2017 One can be a bit blase about inflammables. You can probably remembe this 'experiment' at school: But the same thing under less controlled conditions can be fatal: JOhn Link to comment Share on other sites More sharing options...
Bordfunker Posted December 3, 2017 Author Report Share Posted December 3, 2017 During WWII military aircraft regularly diverted cooled axhaust fumes into the fuel tanks as they emptied, thus preventing an explosion in the event of the tank being hit by flak. So not such a red kneck solution. Karl Link to comment Share on other sites More sharing options...
sami 13/60 Posted December 5, 2017 Report Share Posted December 5, 2017 Apparently my neighbour has done this before, and seems fairly confident........I'll try and have a camera handy! Samantha Link to comment Share on other sites More sharing options...
sami 13/60 Posted December 14, 2017 Report Share Posted December 14, 2017 Well, my neighbour certainly managed a decent job on the tank, as I hope the pic shows, and all at an exceptionally reasonable price......but I don't think he wants to do another one like it! He removed the drain pipe as requested, so a neater fit, and once a grommet is fitted, that'll be one less hole in the floor too. He also did a very neat job welding a long patch over the transverse front boot floor seam, which I think had suffered due to the fuel leak. Just waiting for a weather window to get the tank fitted now ....and then on to sorting out the other jobs. Samantha 1 Link to comment Share on other sites More sharing options...
Pete Lewis Posted December 14, 2017 Report Share Posted December 14, 2017 think said before but while its out replace or check the rubber olive in the reserve swivel union , you could fit a solid copper olive and nip it up tight then it never leaks again but the swivel will be sort of fixed tight . depends if you even feel you need the reserve option, it only drops the suction tube a small amount not hi tech Pete Link to comment Share on other sites More sharing options...
sami 13/60 Posted December 15, 2017 Report Share Posted December 15, 2017 Thanks Pete, I was wondering about the reserve tank.....not really needed to be honest, but I'll investigate anyway Samantha. Link to comment Share on other sites More sharing options...
Pete Lewis Posted December 15, 2017 Report Share Posted December 15, 2017 Samantha , its not really a reserve tank the suction tube inside the tank is curved , not straight, so when you turn the lever on the top you turn the pipe and this just lowers the point is sucks from , simple but effective, , lack of use and age degrades the seal inside the union nut under the lever and this can then leak with a full tank of fuel sloshing about . you need to prise the lever from under the sweep plate and unscrew the sleeve nut , whats under it may be good or ...rubbish ... easy while tanks out but worth a quick look. the repairs looking good. Pete Link to comment Share on other sites More sharing options...
dougbgt6 Posted December 15, 2017 Report Share Posted December 15, 2017 Samantha, Yes a neat job, is your man available for house calls? Doug Link to comment Share on other sites More sharing options...
Colin Lindsay Posted December 15, 2017 Report Share Posted December 15, 2017 57 minutes ago, Pete Lewis said: Samantha , its not really a reserve tank the suction tube inside the tank is curved , not straight, so when you turn the lever on the top you turn the pipe and this just lowers the point is sucks from , simple but effective, , Very effective if, like me, you sometimes let the tank run right down. Stranded two miles from home one night after a show, I remembered the reserve and while it may only be a pint or two more, it got me home. Just remember to keep the lever in the other position so it's always available if you need it. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now