Jump to content

What is this?


Bordfunker

Recommended Posts

I took the driver’s seat out of my Herald the other week so that Mrs B can sort out the split stitching in the seat base.

However having removed the seat mounting I found this under the car.

DCaH1D.jpg

Now I know it’s a body mounting plate, but having checked all the body mounting points all bolts and plates are present and correct, so I am a little bemused as to where this may have come from.

Am I missing something here? Is there another place that these are used?

Karl

Link to comment
Share on other sites

Thanks guys.

It would make sense that it had been used as a seatbelt anchor point, as I’m sure this had been hiding in the driver’s side sill, stuck on the sill edge, and only became dislodged with furttling under the car.

I’ll check the seat belt mounting point as I did replace the driver’s side inertia reel belt with one of the original fixed belts that came with the car, as the inertia one didn’t retract reliably!

I’m thinking the plate probably came off when the inertia belts were fitted.

Thanks again

Karl

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...