Gengis Posted April 23, 2018 Report Share Posted April 23, 2018 I'm after a good 1/4 light glass if anyone has one. Doesn't matter on the condition of the frame just need a good glass. Thanks Link to comment Share on other sites More sharing options...
TomL Posted April 24, 2018 Report Share Posted April 24, 2018 Where are you based? Tom Link to comment Share on other sites More sharing options...
dougbgt6 Posted April 24, 2018 Report Share Posted April 24, 2018 Asia? db Link to comment Share on other sites More sharing options...
Gengis Posted April 24, 2018 Author Report Share Posted April 24, 2018 I'm in Leamington spa Link to comment Share on other sites More sharing options...
Colin Lindsay Posted April 26, 2018 Report Share Posted April 26, 2018 Any particular colour? Reason I'm asking is that I have red white green or brown ones, still in the frames, and it may be easier to send the entire assembly rather than try to dig the glass out - which I can try, if necessary. Link to comment Share on other sites More sharing options...
Pete Lewis Posted April 26, 2018 Report Share Posted April 26, 2018 yes leave it assembled, your can get the glass out but probably never get it back in without a jig to support the frame and a lever press arrangement to press it into the rubber it could be easier to chuck the rubber and infill with piped butyl rubber sealant , just an idea ive never tried but having seen the assembly process we used on the line for ND vents beware of diy or you may end up with a triggers broom or a drafty car ha ! Pete Link to comment Share on other sites More sharing options...
Peter Truman Posted September 23, 2018 Report Share Posted September 23, 2018 I know its 6 months ago but just trawling thro and found it! I have a 76 Dolly Sprint here in OZ and no problems the quarter light glass on both sides just pulled out & slotted back in easy I had to glue them in with a Silkaflex adhesive, won't come out now. Maybe its a Aussie heat thing that shrinks or does something to the rubber. Regards Peter T Link to comment Share on other sites More sharing options...
Colin Lindsay Posted September 23, 2018 Report Share Posted September 23, 2018 My GT6 slotted out and in easily enough, as Pete says I just cleaned out the frame and used sealant to hold it in place again. Gengis never replied so no idea if he still needs one or not. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now