68vitesse Posted August 15, 2018 Report Share Posted August 15, 2018 There is a small bolt which fixes the inner cable to the knob fitting on heater valve and air distribution controls, it also acts as a stop. Any idea of its size and thread, bolt diameter 0.105in or 2.68mm, 3mm x 0.5 tap jams in hole, one of mine has gone missing. Probably could tap out to 3mm if I had to. Regards Paul Link to comment Share on other sites More sharing options...
Mad4classics Posted August 15, 2018 Report Share Posted August 15, 2018 Not sure, but going by the OD you quote it's probably 4-40UNC. David Link to comment Share on other sites More sharing options...
68vitesse Posted September 27, 2018 Author Report Share Posted September 27, 2018 Bolt seems to be 6BA, now working fine with a new length of piano wire. Regards Paul Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now