ahebron Posted July 29, 2019 Report Share Posted July 29, 2019 On 23/07/2019 at 19:46, Pete Lewis said: A while back club shop sold an easy drain adaptor but on some 6s it was not an easy fit due to tight clearance . made draining a clean job Just pop,the cap and out it runs ,, was a bit pricey but concept was good. Pete Always fit these to my moderns as draining oil always seems to hit a bit of the vehicle and reappear somewhere that you dont have a catch tray. I use the Fumoto brand Had on on my 300TDi Disco then L322 TD6 RR and at present my Amarok which has a 90 degree offset. Adrian Link to comment Share on other sites More sharing options...
68vitesse Posted July 29, 2019 Report Share Posted July 29, 2019 On 23/07/2019 at 09:42, Badwolf said: Why is the plug a square head when just about everything else is hex. There must be a logical reason for it? Don't know the reason but have file a large nut to fit over the square then welded it on. Done of the car and a lot easier to remove. Regards Paul Link to comment Share on other sites More sharing options...
Pete Lewis Posted July 29, 2019 Report Share Posted July 29, 2019 square head as its a cheap cast/forged blank. Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now