Sparty Posted April 23, 2015 Report Share Posted April 23, 2015 Not sure what the exhaust is on my Vitesse based Spartan, could someone please tell me what diameter the long front to rear pipe should be. Steve Link to comment Share on other sites More sharing options...
Clive Posted April 23, 2015 Report Share Posted April 23, 2015 which engine? 1600, mk1 2L or mk2 2L? Link to comment Share on other sites More sharing options...
Gary Flinn Posted April 23, 2015 Report Share Posted April 23, 2015 Mk2 Vitesse's are 2" Diameter, not sure on the Mk1 2 Litre or 1600's, I suspect slightly smaller? Mk 1 & 1600 Engines can be identified by the Aly Push Rod Tubes on the side of the Head. Mk2 Engines are simple Cast Iron Sides to the Head and Bigger Studs/nuts to hold them down. Link to comment Share on other sites More sharing options...
Sparty Posted April 23, 2015 Author Report Share Posted April 23, 2015 thanks as I thought the exhaust is too small, looks to be about 1 1/4" diameter ,probably a Herald exhaust Link to comment Share on other sites More sharing options...
Clive Posted April 23, 2015 Report Share Posted April 23, 2015 I could be wrong, but I think a herald 13/60 exhaust is the same bore as the vitesse 1600? But beware as the manifold will determine which exhaust you need, ie a mk2 vit exhaust wont bolt onto a mk1 or 1600 manifold. Link to comment Share on other sites More sharing options...
Sparty Posted April 25, 2015 Author Report Share Posted April 25, 2015 Will have to investigate more, the engine is 2L but maybe an earlier manifold Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now