Fuel pipe routing for GT6 Mk2

[richhl]

Hi,

I'd appreciate any photos and/or information on the routing and clips for the fuel line for a Mk2 GT6 (from fuel pump to tank) - Replacing mine, and I have realised I should have taken clearer photos - also this is not covered in the official or other workshop manuals.

Thanks in advance, Richard.

[Colin Lindsay]

If my Mk1 is anyway similar it just runs from the tank along the outside of the main chassis rail, between floor pan and chassis through the outriggers and to the front where it has the addition of a rubber pipe between the bulkhead and the outrigger to the pump. I can try for photos later?

[dougbgt6]

On my mk3, from the tank to the side of the chassis in the passenger side rear wheel arch. Mine has a short rubber joint there and then follows the side of the chassis to the front and another rubber joint, same as Colin's.

Doug