Phil Hayden Posted March 13, 2020 Report Share Posted March 13, 2020 I'm in the process of doing some rust prevention on the chassis and will be using injecting Dinitro RC900 rust converter into the box sections of the chassis followed by ML cavity wax. While I could poke around with a wire coat hanger to establish where the internal dividers are. Is there a diagram showing the different box sections of the chassis. Thanks Phil. Link to comment Share on other sites More sharing options...
griffipaul Posted March 19, 2020 Report Share Posted March 19, 2020 got this off TR Register some while back as I will need the same info when I start my rebuild . Not validated it though. Hope it helps Link to comment Share on other sites More sharing options...
Phil Hayden Posted April 12, 2020 Author Report Share Posted April 12, 2020 Hi Paul, Thanks for the info. I hadn't been back to the thread for a while but have completed the job using Dinitrol RC900 rust converter and ML cavity wax. I used Aerosols for convenience and found with the extension hose nozzle attachment that I could locate the internal obstructions. They also provide tapered plastic plugs which are very convenient when additional access holes are required ( 10mm drill bit required). Regards Phil Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now