Brooky Posted April 29, 2020 Report Share Posted April 29, 2020 Hello has anyone got a close picture of preferably offside rear sill area, the area between the rear inner arch and suspension arm to body? Mines been botch welded with thick plate and tarred lol, horrible I know basic shape as the old bodywork was underneath but all fell off when cutting out the mess! Cheers Link to comment Share on other sites More sharing options...
Bordfunker Posted April 29, 2020 Report Share Posted April 29, 2020 Which vehicle? 1 Link to comment Share on other sites More sharing options...
Brooky Posted April 29, 2020 Author Report Share Posted April 29, 2020 23 minutes ago, Bordfunker said: Which vehicle? Ah sorry forgot to say GT6 mk3 Thanks Link to comment Share on other sites More sharing options...
Brooky Posted April 30, 2020 Author Report Share Posted April 30, 2020 Sorted a diagram of roughly what it should look like, carefully cutting the botch work off now then redo it properly Cheers Iain. Link to comment Share on other sites More sharing options...
Nick Jones Posted April 30, 2020 Report Share Posted April 30, 2020 These any help? Nick 1 Link to comment Share on other sites More sharing options...
Brooky Posted April 30, 2020 Author Report Share Posted April 30, 2020 Nick, superb cheers, is yours mk3? It does look slightly different, my heelboard is further in than the box section at top and yours looks other way round? Thanks very much Iain. Link to comment Share on other sites More sharing options...
Nick Jones Posted April 30, 2020 Report Share Posted April 30, 2020 Those pics are actually Spitfire. They are structurally the same in this area. If you have a rotoflex Mk3 then the radius arm mounts will be nearer the centre of the car though the heel boards usually have both sets of holes (you can see the roto holes in my second pic on the far left). I've done a GT6 resto (mk3 roto) since but don't seem to have taken many pics of this area, probably because it was much less rotten than the Spitfire. Have these if they are any help Nick 1 Link to comment Share on other sites More sharing options...
Brooky Posted April 30, 2020 Author Report Share Posted April 30, 2020 Thanks very much for those pics Nick, very appreciated. Mine is non rotoflex and the radius arm bolts to the outer two holes. I was told its the best model to have but know nothing about them. I nearly bought one 28 years ago but bought a 70 midget instead and restored and used that all over the country etc, got bored with it and sold it a few years ago lost interest then thought hmm I fancy one of these, Im full on with it at the moment too! Cheers Nick Iain. Link to comment Share on other sites More sharing options...
Brooky Posted May 4, 2020 Author Report Share Posted May 4, 2020 Cheers Nick sorted offside thanks Link to comment Share on other sites More sharing options...
Nick Jones Posted May 5, 2020 Report Share Posted May 5, 2020 That should do it 🙂 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now