Doctor slow Posted May 14, 2020 Report Share Posted May 14, 2020 I can't seem to find how to remove the drivers side dash. It's packed behind with a rat's nest of wire, so I can't get my hand in there, and I need to replace the hazard switch. Do I need to take off the centre dash panel first? Any help appreciated. OOPS SHOULD HAVE SAID, GT6 MK3! Link to comment Share on other sites More sharing options...
Mjit Posted May 14, 2020 Report Share Posted May 14, 2020 It should be similar to the Spitfire MkIV/1500 ones so: The panel is only DIRECTLY held to the dash frame by a stud and nut near the top on the far right side, and a tab that goes behind the centre dash panel at the top that the top/right centre dash screw passes through. It's then held indirectly, to a greater or lesser degree by almost everything on it! I think the bigger holds are: Eyeball air vent - think the retaining ring for this clamps vent->dash->dash frame. Have a feeling the choke cable may go through a dash frame hole too. Then you have everything else that needs to be unscrewed from, or unplugged to release wires. Link to comment Share on other sites More sharing options...
Doctor slow Posted May 14, 2020 Author Report Share Posted May 14, 2020 Thanks for that i'll have a go. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now