GT6 mk3 Girling servo mk2b 5.5” - Repair Kit

[kevin]

Does anybody know who could supply the above kit - I can find plenty for the 7” servo but none for the 5.5” one I have.

[Colin Lindsay]

http://www.jlspares.com/sealkits1.htm

I did a search for the MK2b Servo but have no idea if it's 7", 5.5" or if there were two versions! Many sites seem to list the 2a as 5.5" and the 2b as 7", so I'm none the wiser, but these guys are highly recommended and might be worth a call.

[trigolf]

Kevin,

I've just rebuilt mine with a kit from PowerTrack Brakes. http://www.powertrackbrakes.co.uk/ 

Paul Hunt -the boss -  is very helpful. JL spares will rebuild your servo if you don't fancy it yourself. Or you can get the cylinders resleeved with Stainless if necessary and rebulid yourself.

Gav

[Rabbit]

I had this problem when fitting servo to Spitfire MkIII. Could not get a 5in. The 7in one was slightly to high on the bulkead. I finished up with a new one from a Mini club site (cannot remember exactly where) but a search should find one. It was about £90 complete with adaptors etc. Drilled manifold and tapped for take-off, made bracket for bulkhead and job done. Satisfied with result. I know people say you should not need one but it did brake OK, now it is more like a modern. It retarded before, now it STOPS! 

[thescrapman]

Past Parts in Bury st Edmunds may be able to assist.

[kevin]

Thanks everyone I found a kit at

J & L Spares Export Ltd Trows Mill, Trows Lane Castleton Rochdale Lancashire OL11 2UF