Jump to content

Spitfire MKIV front trunnion rebuild


Recommended Posts

Hi all I am refurbing my front suspension. I have the front trunnion rebuild kit which has come with the rubber seals. The car did not have them before so I am unsure as to how far I wind the trunnion up. 
 

 

Link to comment
Share on other sites

thats odd i posted an answer but its not showing ...lost in space 

I agree fully on and back of 1/2 turn or like   you dont want the thread bottoming out/ thread bound when on full lock 

so its backed off enough to get a full  lock free swivel 

Pete

Link to comment
Share on other sites

I've just been working on these on my own Herald and have found that you can screw them right up to distort the rubber seal, which is too far for use on the car. If you rotate them backwards again from full tightness just enough to go back to the position where they'll be when fitted to the car they can feel a bit tight, but still turn through the degree that the steering will turn on the car. (Make sure you oil them first, just enough to make the turn freely) Don't forget that when fitted they'll probably never turn as far as a complete right angle. If you rotate them off a full 360 degree turn it leaves a slight gap at the top of the seal but they turn more freely, and this is what I've gone for at present - so it's more like a full turn backwards.

Wonder if I've backed off too far? Now I'm getting paranoid... but in the previous position they grated and left small marks on the metal above the threaded portion.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...