Jeffds1360 Posted April 1, 2021 Report Share Posted April 1, 2021 (edited) I do not rate these new rubbers I got from ANG. Just a little cone! When I split the taper and peeled off the old rubbers (they were badly perished) I found they were much more substantial and had a nylon ring at the top which fitted in a recess. Are these new ones really suitable? I loaded lots of grease in before refitting. Bit of a problem tightening but I 'g' clamped it and managed ok. New ones at the top in picture, pieces of old one below. Edit to ask... do they really go with the taper to the top??? Edited April 1, 2021 by Jeffds1360 Question Link to comment Share on other sites More sharing options...
Jeffds1360 Posted April 1, 2021 Author Report Share Posted April 1, 2021 AAAAARGH.....I think I have fitted the seals for the lower joint!!!??? Rollocks Cannot find seals for the top so I'll have to get new balls. Only 16 quid with seals and nipples Gawd. Balls and nipples...wrong site? Link to comment Share on other sites More sharing options...
Scrappy Posted April 1, 2021 Report Share Posted April 1, 2021 https://www.balljointboots.co.uk I use these people Jeff, They last longer than the ones on new joints. Alf. Link to comment Share on other sites More sharing options...
Jeffds1360 Posted April 1, 2021 Author Report Share Posted April 1, 2021 Cheers scrappy. New ball joints ordered. I'll keep them in mind when replacing my rubbers. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now