Gt6 engine into a 1300 mark if spit....which loom?

[Johno]

Greetings,

So I'm putting a gt6 engine in my old 1300 mkiv. Long story boring... Does anyone know which look or combination should be used?

Thanks Johno

[Clive]

No change required. The only things on the engine that have wires are the starter (new starter cable to correct length, leave the solenoid where it is) coil, again you can leave it where it is, just need a longer king lead to dizzy, and the 2 sensors, temp and oil pressure. If you are changing to an electronic rev counter they were never used on GT6, but you will need a GT6 drive cable if you use a std GT6 dizzy and your existing rev counter.