Mathew Posted April 15, 2021 Report Share Posted April 15, 2021 Thinking of changing my pumaspits 1/2 lowering block to the full inch. It still sits with wheels upright. Sometimes slightly out at the bottom but you have to sqint to see it. Whats everyones thoughts . I already have the longer studs fitted. Link to comment Share on other sites More sharing options...
Clive Posted April 15, 2021 Report Share Posted April 15, 2021 What size tyres? If (at a guess) you are running low profile (50 ish profile) 15" you will end up running just on the inner edge. This is not good for grip/roadholding etc. From experience. If you are running 60 or 70 profile, you will cope a bit better with more negaitive camber. I have rotoflex type rear suspension, modified brackets to get less camber change, and run about 2 degrees negative on 185 60 14 tyres. On a swing spring I would prefer 70 profile tyres. Essentially, it is complex! 1 Link to comment Share on other sites More sharing options...
Mathew Posted April 15, 2021 Author Report Share Posted April 15, 2021 Thanks, best sticking (hopefully to the road) with what i have running 45 on 16, plenty of grip. I would drop to 15inch if i could find a set i liked! I like the 11 spoke too much! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now