Simons3 Posted June 25, 2021 Report Share Posted June 25, 2021 After doing a quick refurb of the frame (rubdown and paint) i have refit the unit to the car. Wound you say this is an acceptable fit? Also i notice potential damage to in this area both sides I have put a cloth both sides to cushion. Is there supposed to be a rubber seal on the front of the inner frame? Lastly, is this how the hood sits by the top rear of both doors? I guess it would flap about at speed and cause this to happen. I was wondering if the flap was significant here? I also bought the two chrome effect plastic cappings years ago, but for the life in me, i cannot see how they attach. Has anyone got a close up picture of these fitted to the car? Thanks in advance. Simon Link to comment Share on other sites More sharing options...
Mjit Posted June 25, 2021 Report Share Posted June 25, 2021 For the flaps: Fold the hood down. Open the doors. Put the hood back up. Close the doors. And all will become clear For general fit the big question is, hood up/windows up, does the door glass get anywhere near the 'rain flap'? There should be a long strip of hood inside the glass, then a shorted strip that sits outside the glass on it's bottom edge/forming a gutter above, with the door glass nestling between inner and outter strips. Like I think ever Spitfire I've ever seen you'll probably have a big strip inside, then a thin strip outside...and about 1" above the top of the glass, so all that lovelly road spray can still get in Link to comment Share on other sites More sharing options...
cliff.b Posted July 14, 2021 Report Share Posted July 14, 2021 Think I need to bring forward my hood replacement plans and was going to have a go myself but from past experience, not really the sort of thing I'm particularly good at. Just wondering if anyone else has experience of having one fitted anywhere near Huntingdon, how much should I expect to pay and how long will they need the car? Also, any personal experience regarding the quality and fit of the club shop tops would be appreciated. Many thanks. 1 Link to comment Share on other sites More sharing options...
Clive Posted July 14, 2021 Report Share Posted July 14, 2021 Club hoods are from Don Hoods, probably the best hoods? I recently bought one, same price from either supplier, so club got my business. However, they is a delay in delivery as Don Hoods always have a long queue, even in winter mine took a few weeks.But worth waiting for. Fitting is not difficult or takes very long. (different kettle of fish to herald/vitesse which nearly gave me a nervous breakdown). No idea on fitters, but any competent trimmer should find it an easy job. However, I have yet to fit mine, but after my Scottish trip (about to leave) I will do it on a decent hot/sunny day. Reckon a couple of hours. I bet there are some videos on youtube. You just need contact adhesive and ideally a punch/die for doing the studs. Link to comment Share on other sites More sharing options...
cliff.b Posted July 14, 2021 Report Share Posted July 14, 2021 2 hours ago, clive said: Club hoods are from Don Hoods, probably the best hoods? I recently bought one, same price from either supplier, so club got my business. However, they is a delay in delivery as Don Hoods always have a long queue, even in winter mine took a few weeks.But worth waiting for. Fitting is not difficult or takes very long. (different kettle of fish to herald/vitesse which nearly gave me a nervous breakdown). No idea on fitters, but any competent trimmer should find it an easy job. However, I have yet to fit mine, but after my Scottish trip (about to leave) I will do it on a decent hot/sunny day. Reckon a couple of hours. I bet there are some videos on youtube. You just need contact adhesive and ideally a punch/die for doing the studs. Did it come with all the studs to fit? Link to comment Share on other sites More sharing options...
Badwolf Posted July 14, 2021 Report Share Posted July 14, 2021 I fitted my own but that was about 30 years ago. I don't remember to many problems. As Clive says, get the punch and die kit. Your local areas members may have one you can borrow. A minor point is that my body studs (no, not those!!) were not symmetrical and I only realised when it was to late. One is about 1cm out of true, so measure carefully. Same with the support bars. If fitting vinyl a nice sunny day helps the fit. Don't know about the posher materials. Link to comment Share on other sites More sharing options...
Clive Posted July 15, 2021 Report Share Posted July 15, 2021 On 14/07/2021 at 11:55, cliff.b said: Did it come with all the studs to fit? Yep,just had to get contact adhesive Link to comment Share on other sites More sharing options...
cliff.b Posted July 15, 2021 Report Share Posted July 15, 2021 24 minutes ago, clive said: Yep,just had to get contact adhesive Ok, many thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now