daverclasper Posted October 15, 2021 Report Share Posted October 15, 2021 Hi. I replaced these a bit back, though are poor quality. Some Poly replacements are on the shopping list, though in the meantime I was planning to use some better hose I have knocking about. This hose is straight and valve won't be fastened as is usual. It is approx 10mm I.D and will sqeeze on the stubs, though the original hose looks approx 13mm I.D. Will this affect how the engine runs?. Thanks Dave Link to comment Share on other sites More sharing options...
Pete Lewis Posted October 15, 2021 Report Share Posted October 15, 2021 an open small hose is better than a collapsed larger and ive seen some made from copper plumbing fittings and pipework cheap and lasts a lifetime needs a bit of a head scratch to get it all in place donr forget the valve can go anywhere convenient so long as its upright Pete Link to comment Share on other sites More sharing options...
Iain T Posted October 15, 2021 Report Share Posted October 15, 2021 Dave, Replaced mine with some hose in the kit when I fitted a Mishimoto oil catch can. The old ones were very flexible and soft. Iain Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now