Chris A Posted May 11, 2022 Report Share Posted May 11, 2022 2 hours ago, Pete Lewis said: but only change one part to identify the culprit not all the parts at once Everyone should have a plaque with that on clearly visible where they/we/I keep the tools. Link to comment Share on other sites More sharing options...
PeteH Posted May 11, 2022 Report Share Posted May 11, 2022 44 minutes ago, Chris A said: Everyone should have a plaque with that on clearly visible where they/we/I keep the tools. The other Plaque, should read K. I. S. S. Overcomplicating anything, leads to:- Stress, High B.P. And a rapidly emptying bank account.😭 Pete Link to comment Share on other sites More sharing options...
Colin Posted May 11, 2022 Author Report Share Posted May 11, 2022 Dear All Chaps; Thank you all SO much for the continuing help & support and common sense. I have successfully 'disappeared' the dash light, previously either on temporarily or as yesterday, full-time, warning me of alleged low oil pressure. Achieved, by your very helpful advices to change the oil pressure switch! Lucky I'd considered to buy one previously (meaning for a long time to have changed it, actually). I know why I didn't change it - the old - and I think, original - oil pressure switch - was a devil to shift. I can remember trying to shift it previously and being puzzled by just how tight it was. So gave up for a while until this hiatus. Access to the nut to the rear of the unit was limited (from the top of the engine bay) and it was damned tight. I cannot (& my records do not show) that I have ever changed that switch. So I guess 50 years is not a bad stint of service! I've thrown it away now, but I wonder could I merely have cleaned it out with clean fuel and replaced to see if that had cured its action? Should have saved it, cut it in half to see what's what, really! I had to remove the oil filter to gain decent enough access for removal. I changed the switch and re-fitted the 'old' (but really new) oil filter on the basis that I eliminate only one element of the offending possibilities at a time - as per the advices given. The replacement switch is of a different design - attached here - and really only slightly easier to get a spanner or socket on (from the topside). Test driven, no oil pressure light came on at all. Very pleased about this. Quite a weight off one's mind. Thanks again for all the suggestions and assistances. I hope this will assist others. No doubt the more experienced members out there have helped many others - so thanks for the repetition required and patience shown. Pic of my car, renovated 2020-21 also. Cheers and massive thanks, everyone. Best, Colin. Link to comment Share on other sites More sharing options...
Pete Lewis Posted May 11, 2022 Report Share Posted May 11, 2022 so the do the easy worked well then sorry if we battled on but never get carried away with £££s before you change the ppppennies Pete Link to comment Share on other sites More sharing options...
Colin Posted May 11, 2022 Author Report Share Posted May 11, 2022 Quote if you strip a LP switch its a very cheap simple bit of kit it relies on a weady spring and small diaphragm as i have said more like a cheap bell push its very easy to fail engine vibrations will wreck the spring inside over time and we all think this is what has failed you have one Indeed! Engine vibrations and . . . everything else. My last comment on that is that they are allegedly to build some roads in and around Hernia Bay!! (Yes, I did say Hernia! 😉. I can see all the joint bushes needing replacement because of the above! Link to comment Share on other sites More sharing options...
Colin Posted May 11, 2022 Author Report Share Posted May 11, 2022 Pete Lewis - great advice. Thanks once more. Link to comment Share on other sites More sharing options...
Chris A Posted May 11, 2022 Report Share Posted May 11, 2022 1 hour ago, Colin said: Test driven, no oil pressure light came on at all. I assume it did come on when you turned the ignition to the 'on' position before starting the engine? Link to comment Share on other sites More sharing options...
johny Posted May 11, 2022 Report Share Posted May 11, 2022 Ha ha that would be ironic if the new switch is now open all the time! One thing Id like to comment is that I would recommend never driving a car with its oil light on. If it doesnt go out on start up or comes on while driving I would stop the engine at the earliest opportunity and if necessary call out a pick up truck. It 99% probably going to be a faulty switch but considering the potential damage and work required to repair it the risk isnt worth taking.... Link to comment Share on other sites More sharing options...
Wagger Posted May 11, 2022 Report Share Posted May 11, 2022 Yup, just change the switch. THEN fit a gauge and measure the pressure with a gauge if it still comes on. Both of these take minutes not hours. You only need to fit a gauge temporarily to check it. 1 Link to comment Share on other sites More sharing options...
Colin Posted May 11, 2022 Author Report Share Posted May 11, 2022 Gents! All good advice. I shouldn't havd driven, oil warning light on . . . but somehow I could tell it wasn't the engine failing. Cold engine - ignition switched on 5 mins ago. Oil warning light 'On'. Didn't worry about starting her. My drive earlier with no light showing was good enough for me. Checked oil filter, oil pressure valve and oil pressure switch for tightness before coming in tonight. All good!! Thanks again to all. Best, C. Link to comment Share on other sites More sharing options...
SpitFire6 Posted May 11, 2022 Report Share Posted May 11, 2022 Hi, Fit an oil pressure Gauge. Or keep guessing? Cheers, Iain. PS. Stop using 20W50. LOL. Link to comment Share on other sites More sharing options...
Colin Posted May 11, 2022 Author Report Share Posted May 11, 2022 Iain SpitFire6; The problem with 20/50W is?? 🤔 Link to comment Share on other sites More sharing options...
Clive Posted May 12, 2022 Report Share Posted May 12, 2022 12 hours ago, Colin said: Iain SpitFire6; The problem with 20/50W is?? 🤔 Fine for pottering, but there are much better oils now. Remember many would have been horrified at the thought of a multi grade back in the 60s. And carried on using straight 30. 60 years on we have synthetic oils that are far superior. And ideal for a hard driven car. But for most any old 20/50 will be fine. Just change it annually or 3k max. The difference is obvious. One trackday will turn a mineral oil black and ready for change. Synthetic will do 5, plus another 5k of touring etc, and still look fine. Link to comment Share on other sites More sharing options...
Colin Posted May 12, 2022 Author Report Share Posted May 12, 2022 Hey Clive. Thanks for answering that. So that begs the question - what grade synthetic?? For my aged, tiny 1147??!? Best, Colin Link to comment Share on other sites More sharing options...
Colin Lindsay Posted May 12, 2022 Report Share Posted May 12, 2022 My 13/60 came with four bottles of 30w, sadly none of it had ever been put into the engine but of what was dripping about in the sump, I'll assume it was the same. It's an old engine on higher mileage and gets 20/50 Penrite Classic. Anything else is a waste. Link to comment Share on other sites More sharing options...
Colin Posted May 12, 2022 Author Report Share Posted May 12, 2022 Hi Colin, I guess I've never seen 30 grade because I've never looked for it! The 20/50W I buy from the Club, to support it. Is 30 grade synthetic? Maybe the Club could stock it? Surely most of our engines are getting on a bit and need that extra protection? Does 30 grade show as 30W? C. Link to comment Share on other sites More sharing options...
Colin Lindsay Posted May 12, 2022 Report Share Posted May 12, 2022 23 minutes ago, Colin said: Hi Colin, I guess I've never seen 30 grade because I've never looked for it! You're better off without it!! It's a single grade, not a modern multigrade, so basic, probably adequate for the time, but there are much better about these days. However: being a potterer and certainly not a fast driver or a racer, the closest I get to a track is making sure there isn't a train coming, so I use the basic 20/50 stuff these days. Link to comment Share on other sites More sharing options...
NonMember Posted May 12, 2022 Report Share Posted May 12, 2022 40 minutes ago, Colin said: So that begs the question - what grade synthetic?? For my aged, tiny 1147??!? Do you thrash it? Do you do track days? Are you going to drive it round Britain in a weekend? If the answer is "no" to all three then just keep using 20W50 (or Penrite 20W60, which is my preferred oil for the Vitesse and Spitfire) 1 Link to comment Share on other sites More sharing options...
Colin Posted May 12, 2022 Author Report Share Posted May 12, 2022 Ah ha! Well, I thrash around Hernia Bay a bit and up and down the Gannet Way . . . but no, none of those sensibly listed! 20W60 sounds interesting. Thanks All. Interesting! Best, C. Link to comment Share on other sites More sharing options...
Chris A Posted May 12, 2022 Report Share Posted May 12, 2022 For me it is a 'classic' formula 20/50 bought in a 30 litre drum direct from the manufacturer here. Oil and filter both changed annually, sadly I don't need to do it more often as I don't get the mileage in. 'Must try harder' as my school reports used to say 🙄 Link to comment Share on other sites More sharing options...
Colin Posted May 12, 2022 Author Report Share Posted May 12, 2022 That's a great way to deal with it! I'll need more room to store a 30 gall drum! Best, C. Link to comment Share on other sites More sharing options...
Chris A Posted May 12, 2022 Report Share Posted May 12, 2022 2 hours ago, Colin said: That's a great way to deal with it! I'll need more room to store a 30 gall drum! Best, C. Mine is 30 LITRES, fits nicely on a shelf and has a handy tap, just like a beer barrel . . . . . Link to comment Share on other sites More sharing options...
Colin Posted May 12, 2022 Author Report Share Posted May 12, 2022 That sounds great! Now . . . Competition for shelfspace . . . Beer . . . or Oil?? 😁 Link to comment Share on other sites More sharing options...
68vitesse Posted May 12, 2022 Report Share Posted May 12, 2022 Ordered 2x5Lt Dynolite 20/60 for my Vitesse from James Paddock, with other items, no surcharge for the weight and very well packed. Regards Paul. Link to comment Share on other sites More sharing options...
Iain T Posted May 12, 2022 Report Share Posted May 12, 2022 1 hour ago, Colin said: Beer . . . or Oil?? 😁 Beer 🍺 Cheers Iain 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now