Nick Fane
-
Posts
16 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Store
Events
Everything posted by Nick Fane
-
Adding a brake servo to my Vitesse, with a revision of the crankcase breather assembly to provide the vacuum take-off.
-
-
From the album: Brake Servo Project
The lower part of the breather was machined to fit in the simple adaptor block - which also provided a vacuum take-off for the servo.© Nick Fane
-
From the album: Brake Servo Project
This arrangement completely removes the 'S'-shaped pipe and use a simple straight section to connect to the rocker box.© Nick Fane
-
From the album: Brake Servo Project
Not the usual position for the servo - but quite successful.© Nick Fane
-
Third Brake-Light Project
Images added to a gallery album owned by Nick Fane in Members Albums Category
Details of number-plate/reversing light conversion project. The reversing lamp was replaced by a red LED as a 3rd brake light, with 2 smaller LEDs each side providing an up-rated reversing light. -
-
-
From the album: Third Brake-Light Project
© Nick Fane
-
From the album: Third Brake-Light Project
© Nick Fane
-
From the album: Third Brake-Light Project
Revised rear light, showing the red LED in the centre - now used as a 3rd brake light. Each side are extra white LEDs providing a superior reversing light.© Nick Fane
-
My Vitesse - MkI 2Ltr Convertible
-
-
From the album: UXC675F
© Nick Fane
-
-
From the album: UXC675F
© Nick Fane
-
From the album: UXC675F
© Nick Fane
-
From the album: UXC675F
© Nick Fane
-
From the album: UXC675F
© Nick Fane
