[2 speed wiper switch]

Thanks Roger,

I'll upload pictures of switch and wire plug on wiper motor. First pic is of I believe a Lucas switch for 2 speed motor, but cannot find wiring diagram for it.

2nd pic is the wired plug on the wiper motor

So question is how do I wire switch and can I do it without a really?

[2 speed wiper switch]

This may have been discussed before so excuse my repetitive question. I have a 2 speed lucas wiper motor with 5 pins. It was originally set up with a relay, I changed the switch and found a wiring diagram that did away with the relay. Anyways this old rotary switch is somewhat unhappy. i have looked at a Lucas toggle switch and have seen some advertised. which would be the best switch to fit the hole in the dashboard, and also how to wire it without a relay to the 5 pin plug.

Any help would be appreciated, I have googled till my brain has started ti fizz, going for a lie down now.🙄

[herald 13/60 fitting rear valance]

Thaks clive just ordered a roll and will check underneath.

Shaf

[herald 13/60 fitting rear valance]

Thanks , managed to do it, but fuel metal pipe rusty and sprang a leak, took the boot off to gain more wiggle room. Now to find a new pipe. 

Thanks

Shaf

[herald 13/60 fitting rear valance]

Thanks will go back out and try and wiggle, have been doing it for 20mins already. Good to know not to touch drain plug.

Thanks

[herald 13/60 fitting rear valance]

Hi all,

Help required, I'm trying to fit rear passenger side valance, I think I have have to remove the petrol tank to locate the nuts to remove old one, here in lies my problem, I cannot get the tank out especially if I try and pull the tank up in the boot to clear the drain plug, do I need to remove drain plug? I don't want to as I know they can be awkward and leak. Any tips welcomed. 

Thanks

Shaf

[Herald chassis side rail]

Thanks Steve, more dam welding, costing me a fortune to keep on the road.

[Herald chassis side rail]

Just a quick question, are the side rails just bolted on to the main chassis and body or do they have to be welded as well?

Thanks 

Shaf

[The Courier Online?]

I would like to add, I read the Courier magazine but do not keep it, the previous website where people could ask for help and receive it , with the vast knowledge of members was what made it for me. I have only recently come back on line, having found that you now have the forum reinstated. What a fantastic idea and somewhat slow uptake. Please get this through. What a wealth of knowledge just waiting to be made available on line. At the moment I am having to search google for what the back dated couriers would already have dealt with.

 

Regards

Shaf