Puglet1 Posted July 12, 2023 Report Share Posted July 12, 2023 (edited) Hello All. I am picking up some MX5 Mk1 seats on the weekend. At this stage I’m guessing the seat rail holes won’t align with the ones on the floor. I need to keep the seats as low to the floor as possible, Does anyone have any recommendations on how to do this and how to modify the runners? Pete Edited July 12, 2023 by Puglet1 Required additional information. Link to comment Share on other sites More sharing options...
Josef Posted July 13, 2023 Report Share Posted July 13, 2023 I have the same seats in my Herald. If I was to do this job again I would not modify the MX5 runners, rather would just drill suitable holes in the floorpan. You can get them to fit the original mounting points but it involves slotting the holes where the seats bolt to the runners, cutting bits off the runners, and it will make them super awkward to fit to the car. Note too that the runners are asymmetric! So the bolt pattern for the left and right seats differs very slightly. Link to comment Share on other sites More sharing options...
Puglet1 Posted July 13, 2023 Author Report Share Posted July 13, 2023 1 hour ago, Josef said: I have the same seats in my Herald. If I was to do this job again I would not modify the MX5 runners, rather would just drill suitable holes in the floorpan. You can get them to fit the original mounting points but it involves slotting the holes where the seats bolt to the runners, cutting bits off the runners, and it will make them super awkward to fit to the car. Note too that the runners are asymmetric! So the bolt pattern for the left and right seats differs very slightly. Hi Josef. I shall take a look when the seats arrive. Do you have any photos of your modification? Many thanks. Pete. Link to comment Share on other sites More sharing options...
Josef Posted July 13, 2023 Report Share Posted July 13, 2023 No, and it’s not very photographable with the seats in the car. However, I’ll try and illustrate with a spare set of runners I have. Link to comment Share on other sites More sharing options...
Puglet1 Posted July 13, 2023 Author Report Share Posted July 13, 2023 Hi Josef. Please don’t put yourself out. I have found an installation method on line which consists of securing flat bars to the floor pan and then bolting the seats to the bars. Thank you for your help. Pete. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now