Karlos Posted August 7 Report Share Posted August 7 Hi, I converting my spitfire to overdrive from non-overdrive. I’ve put the overdrive prop shaft in it seems to be shorter than original. It’s gonna be bolt up underneath the tunnel. looking at my donor car, the tunnel seem shorter. Do I need to cut where the line is in my car, this will shorten the tunnel and be able to do the bolt up thanks PS, it’s the non-OD Gearbox in the picture Link to comment Share on other sites More sharing options...
johny Posted August 7 Report Share Posted August 7 Your OD box should be 1" longer then the original so a different prop and one of these is used to allow access... Link to comment Share on other sites More sharing options...
Karlos Posted August 7 Author Report Share Posted August 7 8 minutes ago, johny said: Your OD box should be 1" longer then the original so a different prop and one of these is used to allow access... Thanks, I have that piece, the screw was under the carpet. Removed now and perfect. Thanks save me getting the cutter out! Link to comment Share on other sites More sharing options...
johny Posted August 7 Report Share Posted August 7 Are you doing the swop without a manual Karlos😲 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now