Richeee Posted February 25 Report Share Posted February 25 Hi. On my other thread some will know im restoring my Herald 13/60. Now fitting the door skin. All ok so far gently tapping the flange over. Working my way round using the swage lines as the reference point and these line up. As i get to the top front curve round to the quarterlight the panel is not touching the frame. Not a problem as it can be moved towards the frame. This closes the gap for the window and seals from 20mm to 15mm. On my spare parts car its 20mm or just under. Just wondering i if there is a set dimension between the frame and the skin for the window to fit with the seals. ? Maybe i should not worry. ? Any body who has fitted skins able to advise. ? Thanks Link to comment Share on other sites More sharing options...
johny Posted February 26 Report Share Posted February 26 Thought the gap would be decided by the thickness of the quarterlight frame plus a little for the outer seal strip so both fit reasonably snuggly... Link to comment Share on other sites More sharing options...
Richeee Posted February 26 Author Report Share Posted February 26 Thank you, lateral thinking. Into the garage roof to get a quarter light frame. Ta. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now