Doctor slow Posted June 11 Report Share Posted June 11 Installing a lowering block (half inch), and perhaps foolishly didn't notice which way up the studs are fitted. The threaded ends are different lengths. Firstly are they the same thread, and secondly which end screws into the diff. Any help, please. I did wonder while pondering this why they can't be replaced with a bolt? Link to comment Share on other sites More sharing options...
johny Posted June 11 Report Share Posted June 11 Yes same thread and shorter section goes into diff which leaves the longer threaded part to allow the release of the spring tension. Also the diff casing holes are not blind so screwing the long section into them might mean they interfere with the internals... 1 Link to comment Share on other sites More sharing options...
Doctor slow Posted June 11 Author Report Share Posted June 11 Thanks Johny Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now