CDSE 150 Carbs fitted to Vitesse Mk2

Hi finally getting round to set up my refurbished CDSE150's on my Vitesse MK2 The settings I was given was Float height 18mm Fixed Jet height 100 thou Ive set the float height - no issues . The front carb fixed jet height is 100 thou so set correctly The rear carb fixed jet height is currently 112 thou. On examination the end is slightly flattened on one side and its bent, albeit minor , see pics . I was going to push the fixed jet in further using a vice to achieve 100 th

Hi Pete, thanks for input - seller has agreed to fit new jet . For my info you Hi Pete - The company I bought the refurb CDSE's from has agreed to fit a new jet - For my info you said "overall 0.012"is not overly important the needle will adjust to compensate the height and being biased should accommodate the misalignment enough to achieve basic mixture setting ." How does the needle compensate for the 12 thou , or does the needle have to be dropped by 12 thou to compensate B