Thanks to everyone who helped on this topic. Some great advice. Rear tub removed, panels and metal arrived, garage tidied, so it's now practice and then deciding if I remove the front bulkhead to fully paint the chassis....
Thanks for all the replies. I have got some sheet metal from Frosts which seem good.
Any views, 6mm, 8mm or 9mm welding wire for body panels?
Removed the rear body tub the weekend. Now for plenty of practice.
I am about to embark on recommissioning my Vitesse and will need to get the MIG welder out. I want to be a better welder before I get going. Anyone know of anyone or where I can get some MIG welding training. Perhaps a day or half a day to hone my skills. I live in Guildford. Thanks.
Thanks, I think it is one of the TD Fitchett ones that I have which does not fit. I am leaning towards welding on a new upstanding lip to the better fitting panel.
I am trying to get hold of the vitesse/herald rear seat pan repair panels right and left hand- part numbers 806692RH/806692LH
Anyone know who might have them (tried the usually places and they are not being made)
Thanks,
Jonathan
I am replacing a Vitesse MK2 rear inner wheel arch outer panel. I have tried 2 different panels.
One panel has the flange to fit to the inner panel via spot welds but the panel is not a good fit.
I have another panel from Rimmers that fits but does not the flange to fit to the inner panel.
Any suggestions on where to get the best MK2 rear inner wheel arch outer panel and or how to fit the panel I have that does not have the flange.
Many thanks,
Jonathan