ian.osprey Posted August 14, 2014 Report Share Posted August 14, 2014 To summarise and continue some questions I had been asking via facebook. Q. Having seen drip channels welded on and others pop riveted, which is correct? A Welded. (Courtesy of Andy Brooker) Q Having seen the lower sections of the drip channels (ears) both opened out to meet up with the bulkhead gutter, and pushed in flush with the windscreen frame, which is correct? A. Early Heralds were opened out, later ones were pushed in.(Courtesy of Bill Davies) Latest question. Since the drip channels I removed were not original, how far should the channel protrude from the windscreen frame, and is the gap even all he way down? A photo would be very helpful if anyone has one to hand. Link to comment Share on other sites More sharing options...
ian.osprey Posted August 19, 2014 Author Report Share Posted August 19, 2014 Was at the Bigger show on Sunday and got some good photos of the channels on a a few Heralds. The were all the same so going with that. The head of my house key just fitted in the channel. Not much good for anyone else, but I'm sorted☺ Link to comment Share on other sites More sharing options...
mishmosh Posted August 22, 2014 Report Share Posted August 22, 2014 glad it eventually made sense! Put up some pics when you can Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now