Roy Posted September 23, 2014 Report Share Posted September 23, 2014 Where can I buy adaptor mounting plates for twin HS6 SUs mounted to a Stromberg inlet manifold? Thanks Link to comment Share on other sites More sharing options...
Clive Posted September 23, 2014 Report Share Posted September 23, 2014 Moss used to sell them, however if you file the carb bodies a little to elongate the mounting holes they will then bolt on, much neater. You also need to open the manifold up so the intake matches the carbs, otherwise you are wasting your time. Link to comment Share on other sites More sharing options...
Clive Posted September 23, 2014 Report Share Posted September 23, 2014 And is that a mk3 spitfire (with 2 extra pots) that may be nearing completion???? Link to comment Share on other sites More sharing options...
Roy Posted September 24, 2014 Author Report Share Posted September 24, 2014 And is that a mk3 spitfire (with 2 extra pots) that may be nearing completion???? It certainly is Clive, been on it since August, on a mission to get it fired up the year end. Ref the carb mounts, I did port the inlet manifold bores before fitting, will look at slotting the carb holes. Stressing over the fuel pipe route now as rotoflex install obstructs the route along the chassis. Roy Link to comment Share on other sites More sharing options...
Clive Posted September 24, 2014 Report Share Posted September 24, 2014 good to hear it will soon be finished. Sorry I can't help with pipe routing, I cheated and brought the flow and return to the tank in front of the spring hump....... From memory the factory solution was not exactly "engineered" Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now